The coupling-loss-induced quench (CLIQ) is an innovative system for the protection of superconducting magnets. Its energy-deposition mechanism, based on coupling loss generated directly in the superconductor, is fundamentally faster than heat diffusion, upon which traditional quench-heater-based systems rely. CLIQ electrical design relies on simple and robust components, i.e., easy to install and be replaced in case of damage. After being successfully tested on model magnets of different geometries and types of superconductor, CLIQ is now applied for the first time for the protection of a full-scale dipole magnet. For this purpose, a 14-m-long LHC twin-aperture dipole magnet is equipped with CLIQ terminals and two 80-mF 500-V CLIQ units are connected to its windings. Experimental results obtained under various operating conditions convincingly show that a CLIQ-based quench protection system can effectively protect large-scale magnets by quickly and homogeneously transferring to the normal-state voluminous regions of the winding packs. A developed dedicated simulation code correctly reproduces the complex electrothermal transient occurring during a CLIQ discharge. The successful test completes the development program of CLIQ quench protection systems, which has convincingly demonstrated the maturity and readiness of the system for application in large-scale magnet systems.

The coupling-loss induced quench system (CLIQ) is an innovative method for the protection of high-field superconducting magnets. With respect to the conventional method based on quench heaters, it offers significant advantages in terms of electrical robustness and energy-deposition velocity. Its effective intrawire heating mechanism targets a fast and homogeneous transition to the normal state of the winding pack, hence assuring a quick magnet discharge and avoiding overheating of the coil's hot spot. Furthermore, it is possible to implement CLIQ as a time- and cost-effective repair solution for the protection of existing magnets with broken quench heaters. After being successfully tested on model magnets of different geometries and made of different types of superconductor, CLIQ is now applied for the first time for the protection of a full-scale quadrupole magnet at the CERN magnet test facility. One aperture of a 3.4-m-long LHC matching quadrupole magnet is equipped with dedicated terminals to allow the connection of a CLIQ system. Experimental results convincingly show that CLIQ can protect this coil over the entire range of operating conditions. The complex electrothermal transients during a CLIQ discharge are successfully reproduced by means of a 2-D model. The test is part of the RD program of CLIQ quench protection systems, which has convincingly demonstrated the maturity of this technology and its effectiveness also for large-scale magnet systems. The proposed CLIQ-based solution for the quench protection of the LHC matching quadrupole magnet is now ready to be implemented in the LHC machine if needed.

For the Large Hadron Collider luminosity upgrade, two of the NbTi 8.3 T main bending dipoles will be replaced by two shorter Nb3Sn 11.2 T dipoles to create space for the installation of collimators in the dispersion suppression region. With the aim to verify the design features, several 2 m long 11 T models have been constructed and tested at CERN. During the fabrication and assembly of, so far, seven single and two double aperture short model magnets, several challenges were identified and tackled. These include reproducibility in coil fabrication and assembly procedure, as well as control of mechanical stresses in the conductor and surrounding structure. In order to limit coil over-compression and improve reproducibility, the cable insulation was re-optimized. In addition, a review of the collaring procedure of the 11 T magnet was launched with the goal of reducing the risk of conductor degradation due to excessive stress. In this paper, the main fabrication and assembly steps are described, including the description of the actions taken to resolve the identified weakness.

The test of the first LARP (LHC Accelerator Research Program) Long Quadrupole is a significant milestone toward the development of Nb3Sn quadrupoles for LHC (Large Hadron Collider) Luminosity Upgrades. These 3.7-m long magnets, scaled from the 1-m long Technological Quadrupoles, are used to develop our capabilities to fabricate and assemble Nb3Sn coils and structures with lengths comparable to accelerator magnet dimensions. The long quadruples have a target gradient of 200 T/m in a 90-mm aperture. Pre-stress and support are provided by an Al-shell-based structure pre-loaded using bladders and keys. The coils were fabricated at BNL and FNAL, the hell-based structure was designed and assembled at LBNL, the test is performed at FNAL. In this paper we present the final steps of the development of the first model (LQS01), several upgrades to the test facility, the test results of witness cables, and the short sample limit © 2006 IEEE.