A case of continental outflow from the United States (US) was examined using airborne measurements from NASA DC-8 flight 13 during the Intercontinental Chemical Transport Experiment-North America (INTEXNA). Mixing ratios of methane (CH4) and carbon monoxide (CO) at 8-11 km altitude over the North Atlantic were elevated to 1843 ppbv and 134 ppbv respectively, while those of carbon dioxide (CO2) and carbonyl sulfide (COS) were reduced to 372.4 ppmv and 411 pptv respectively. In this region, urban and industrial influences were evidenced by elevated mixing ratios and good linear relationships between urban and industrial tracers compared to North Atlantic background air. Moreover, low mixing ratios and a good correlation between COS and CO2 showed a fingerprint of terrestrial uptake and minimal dilution during rapid transport over a 1-2 day time period. Analysis of synoptic conditions, backward trajectories, and photochemical aging estimates based on C3H8/C2H6 strongly suggested that elevated anthropogenic tracers in the upper troposphere of the flight region were the result of transport via convection and warm conveyor belt (WCB) uplifting of boundary layer air over the southeastern US. This mechanism is supported by the similar slope values of linear correlations between long-lived (months) anthropogenic tracers (e. g., C2Cl4 and CHCl3) from the flight region and the planetary boundary layer in the southeastern US. In addition, the aircraft measurements suggest that outflow from the US augmented the entire tropospheric column at mid-latitudes over the North Atlantic. Overall, the flight 13 data demonstrate a pervasive impact of US anthropogenic emissions on the troposphere over the North Atlantic.

Precise diagnostics of picocoulomb level particle bunches produced by laser plasma accelerators (LPAs) can be a significant challenge. Without proper care, the small signals associated with such bunches can be dominated by a background generated by laser, target, laser–plasma interaction and particle induced radiation. In this paper, we report on first charge measurements using the newly developed Turbo-ICT for LPAs. We outline the Turbo-ICT working principle, which allows precise sub-picocoulomb measurements even in the presence of significant background signals. A comparison of the Turbo-ICT, a conventional integrating current transformer (ICT) and a scintillating screen (Lanex) was carried out at the Berkeley Lab Laser Accelerator. Results show that the Turbo-ICT can measure sub-picocoulomb charge accurately and has significantly improved noise immunity compared to the ICT.

Control of the properties of laser-plasma-accelerated electron beams that were injected along a shock-induced density downramp through precision tailoring of the density profile was demonstrated using a 1.8 J, 45 fs laser interacting with a mm-scale gas jet. The effects on the beam spatial profile, steering, and absolute energy spread of the density region before the shock and tilt of the shock were investigated experimentally and with particle-in-cell simulations. By adjusting these density parameters, the electron beam quality was controlled and improved while the energy (30-180 MeV) and energy spread (2-11 MeV) were independently tuned. Simple models that are in good agreement with the experimental results are proposed to explain these relationships, advancing the understanding of downramp injection. This technique allows for high-quality electron beams with percent-level energy spread to be tailored based on the application.

Gas-phase elemental mercury (Hg degrees) was measured aboard the NASA DC-8 aircraft during the Intercontinental Chemical Transport Experiment Phase B (INTEXB) campaign in spring 2006. Flights were conducted around Mexico City and on two subsequent deployments over the North Pacific based out of Honolulu, Hawaii and Anchorage, Alaska. Data obtained from 0.15-12 km altitude showed that Hg degrees exhibited a relatively constant vertical profile centered around 100 ppqv. Highly concentrated pollution plumes emanating from the Mexico City urban agglomeration revealed that mixing ratios of Hg degrees as large as 500 ppqv were related to combustion tracers such as CO, but not SO2 which is presumably released locally from coal burning, refineries, and volcanoes. Our analysis of Mexico City plumes indicated that widespread multi-source urban/industrial emissions may have a more important influence on Hg degrees than specific point sources. Over the Pacific, correlations with CO, CO2, CH4, and C2Cl4 were diffuse overall, but recognizable on flights out of Anchorage and Honolulu. In distinct plumes originating from the Asian continent the Hg degrees- CO relationship yielded an average value of similar to 0.56 ppqv/ppbv, in good agreement with previous findings. A prominent feature of the INTEX-B dataset was frequent total depletion of Hg degrees in the upper troposphere when stratospherically influenced air was encountered. Ozone data obtained with the differential absorption lidar (DIAL) showed that the stratospheric impact on the tropospheric column was a common and pervasive feature on all flights out of Honolulu and Anchorage. We propose that this is likely a major factor driving large-scale seasonality in Hg degrees mixing ratios, especially at mid-latitudes, and an important process that should be incorporated into global chemical transport models.

An in situ diagnostic for verifying the spectral phase of an intense laser pulse at focus is presented. This diagnostic relies on measuring the effect of optical compression on ionization-induced blueshifting of the laser spectrum. Experimental results from the Berkeley Lab Laser Accelerator, a laser source rigorously characterized by conventional techniques, are presented and compared with simulations to illustrate the utility of this technique. These simulations show distinguishable effects from second-, third-, and fourth-order spectral phase.

Density transition injection is an effective technique for controllably loading electrons into a trapped phase for laser plasma accelerators. One common technique to achieve the required fluid structure is to impinge a thin blade on the plume of a supersonic nozzle. Density transitions induced in this way are often assumed to be bow shocks and therefore sharp, but simulations and fluorescence measurements presented in this work show that in many cases of interest, the density transition accessible to a laser propagating transverse to the shock is an intercepting shock, and therefore, shock thickness and density vary with pressure, laser height, and blade position. The fluid dynamics of a supersonic nozzle impinged on by a thin, flat object are explored through simulations and relevant features are verified via planar laser-induced fluorescence measurements. The implications of the results for tuning electron beam injectors in laser plasma accelerators are discussed.

One of the most robust methods, demonstrated to date, of accelerating electron beams by laser-plasma sources is the utilization of plasma channels generated by the capillary discharges. Although the spatial structure of the installation is simple in principle, there may be some important effects caused by the open ends of the capillary, by the supplying channels etc., which require a detailed 3D modeling of the processes. In the present work, such simulations are performed using the code MARPLE. First, the process of capillary filling with cold hydrogen before the discharge is fired, through the side supply channels is simulated. Second, the simulation of the capillary discharge is performed with the goal to obtain a time-dependent spatial distribution of the electron density near the open ends of the capillary as well as inside the capillary. Finally, to evaluate the effectiveness of the beam coupling with the channeling plasma wave guide and of the electron acceleration, modeling of the laser-plasma interaction was performed with the code INF&RNO.

We describe the development and operation of a regenerative, cryogenically-formed discharge waveguide formed by freezing nitrous oxide gas onto the inner wall of a sapphire capillary. We demonstrate a technique for varying the channel diameter in situ and present guiding of low-power laser pulses through 6-cm long waveguides with channel diameters of 0.7, 0.8, and 1 mm. Measurements and simulations of the output laser fluence showed that the matched spot size could be adjusted with the thickness of the solid nitrous oxide layer.