Over the past several decades, ambient pressure x-ray photoelectron spectroscopy (APXPS) has emerged as a powerful technique for in situ and operando investigations of chemical reactions under relevant ambient atmospheres far from ultra-high vacuum conditions. This review focuses on exemplary cases of APXPS experiments, giving special consideration to experimental techniques, challenges, and limitations specific to distinct condensed matter interfaces. We discuss APXPS experiments on solid/vapor interfaces, including the special case of 2D films of graphene and hexagonal boron nitride on metal substrates with intercalated gas molecules, liquid/vapor interfaces, and liquid/solid interfaces, which are a relatively new class of interfaces being probed by APXPS. We also provide a critical evaluation of the persistent limitations and challenges of APXPS, as well as the current experimental frontiers.

Dimethyl methylphosphonate (DMMP) is a common chemical warfare agent simulant and is widely used in adsorption studies. To further increase the understanding of DMMP interactions with metal oxides, ambient pressure X-ray photoelectron spectroscopy was used to study the adsorption of DMMP on MoO3, including the effects of oxygen vacancies, surface hydroxyl groups, and adsorbed molecular water. Density functional theory calculations were used to aid in the interpretation of the APXPS results. An inherent lack of Lewis acid metal sites results in weak interactions of DMMP with MoO3. Adsorption is enhanced by the presence of oxygen vacancies, hydroxyl groups, and molecular water on the MoO3 surface, as measured by photoelectron spectroscopy. Computational results agree with these findings and suggest the formation of methanol through several possible pathways, but all require a proton transferred from a hydroxyl group on the surface.

Increased interactions at the graphene-metal interface are here demonstrated to yield an effective prevention of intercalation of foreign species below the graphene cover. Hereby, an engineering pathway for increasing the usability of graphene as a metal coating is demonstrated. Graphene on Ir(111) (Gr/Ir(111)) is used as a model system, as it has previously been well-established that an increased interaction and formation of chemical bonds at the graphene-Ir interface can be induced by hydrogen functionalization of the graphene from its top side. With X-ray photoelectron spectroscopy, it is shown that hydrogen-induced increased interactions at the Gr/Ir(111) interface effectively prevents intercalation of CO in the millibar range. The scheme leads to protection against at least 10 times higher pressure and 70 times higher fluences of CO, compared to the protection offered by pristine Gr/Ir(111).

We use ambient-pressure X-ray photoelectron spectroscopy (APXPS) to study chemical changes, including hydroxylation and water adsorption, at copper oxide surfaces from ultrahigh vacuum to ambient relative humidities of ∼5%. Polycrystalline CuO and Cu₂O surfaces were prepared by selective oxidation of metallic copper foils. For both oxides, hydroxylation occurs readily, even at high-vacuum conditions. Hydroxylation on both oxides plateaus near ∼0.01% relative humidity (RH) at a coverage of ∼1 monolayer. In contrast to previous studies, neither oxide shows significant accumulation of molecular water; rather, both surfaces show a high affinity for adventitious carbon contaminants. Results of isobaric and isothermic experiments are compared, and the strengths and potential drawbacks of each method are discussed. We also provide critical evaluations of the effects of the hot filament of the ion pressure gauge on the reactivity of gas-phase species, the peak fitting procedure on the quantitative analysis of spectra, and rigorous accounting of carbon contamination on data analysis and interpretation. This work underscores the importance of considering experimental design and data analysis protocols during APXPS experiments with water vapor in order to minimize misinterpretations arising from these factors.

Organophosphonates are used as chemical warfare agents, pesticides, and corrosion inhibitors. New materials for the sorption, detection, and decomposition of these compounds are urgently needed. To facilitate materials and application innovation, a better understanding of the interactions between organophosphonates and surfaces is required. To this end, we have used diffuse reflectance infrared Fourier transform spectroscopy to investigate the adsorption geometry of dimethyl methylphosphonate (DMMP) on MoO3, a material used in chemical warfare agent filtration devices. We further applied ambient pressure X-ray photoelectron spectroscopy and temperature programmed desorption to study the adsorption and desorption of DMMP. While DMMP adsorbs intact on MoO3, desorption depends on coverage and partial pressure. At low coverages under UHV conditions, the intact adsorption is reversible. Decomposition occurs with higher coverages, as evidenced by PCHx and POx decomposition products on the MoO3 surface. Heating under mTorr partial pressures of DMMP results in product accumulation.

Hydrogen functionalization of graphene by exposure to vibrationally excited H₂ molecules is investigated by combined scanning tunneling microscopy, high-resolution electron energy loss spectroscopy, X-ray photoelectron spectroscopy measurements, and density functional theory calculations. The measurements reveal that vibrationally excited H₂ molecules dissociatively adsorb on graphene on Ir(111) resulting in nanopatterned hydrogen functionalization structures. Calculations demonstrate that the presence of the Ir surface below the graphene lowers the H₂ dissociative adsorption barrier and allows for the adsorption reaction at energies well below the dissociation threshold of the H-H bond. The first reacting H₂ molecule must contain considerable vibrational energy to overcome the dissociative adsorption barrier. However, this initial adsorption further activates the surface resulting in reduced barriers for dissociative adsorption of subsequent H₂ molecules. This enables functionalization by H₂ molecules with lower vibrational energy, yielding an avalanche effect for the hydrogenation reaction. These results provide an example of a catalytically active graphene-coated surface and additionally set the stage for a re-interpretation of previous experimental work involving elevated H₂ background gas pressures in the presence of hot filaments.