Lithium phosphorus oxynitride (LiPON) is an amorphous solid-state lithium ion conductor displaying exemplary cyclability against lithium metal anodes. There is no definitive explanation for this stability due to the limited understanding of the structure of LiPON. Herein, we provide a structural model of RF-sputtered LiPON. Information about the short-range structure results from 1D and 2D solid-state NMR experiments. These results are compared with first principles chemical shielding calculations of Li-P-O/N crystals and ab initio molecular dynamics-generated amorphous LiPON models to unequivocally identify the glassy structure as primarily isolated phosphate monomers with N incorporated in both apical and as bridging sites in phosphate dimers. Structural results suggest LiPON's stability is a result of its glassy character. Free-standing LiPON films are produced that exhibit a high degree of flexibility, highlighting the unique mechanical properties of glassy materials.

The kinetics of ligand exchange between the free oxalate ion, C2 O4 2- , and the bis-oxalato NpV complex, [NpO2 (C2 O4 )2 ]3- , in aqueous solution are reported by using 13 C and 17 O NMR spectroscopy methods. Rates of exchange were measured in the pH regime of 6.5-9.0, at which speciation is shown to be suitably simple. Because the neptunium(V) complex is paramagnetic, the rates of ligand exchange were estimated by following the width of the 13 C and 17 O signals assigned to the free oxalate ion in solution and by applying the Swift-Connick method for measuring rates of exchange. A set of experiments were conducted in which pH and total oxalate concentration were varied, and the linear dependence of the rate on these parameters was demonstrated. Variable-temperature NMR spectroscopy was also performed to measure activation parameters of complexation. At pH<8.0, ΔH≠ =16.9 ±4.9 kJ mol-1 and ΔS≠ =-116.3 ±17.1 kJ mol-1  K-1 , whereas at pH>8.0 there is almost no dependence on temperature, which is interpreted to indicate that hydrolysis is coupled to ligand exchange under these conditions.

Lithium phosphorus oxynitride (LiPON) is an amorphous solid-state lithium ion conductor displaying exemplary cyclability against lithium metal anodes. There is no definitive explanation for this stability due to the limited understanding of the structure of LiPON. Herein, we provide a structural model of RF-sputtered LiPON. Information about the short-range structure results from 1D and 2D solid-state NMR experiments. These results are compared with first principles chemical shielding calculations of Li-P-O/N crystals and ab initio molecular dynamics-generated amorphous LiPON models to unequivocally identify the glassy structure as primarily isolated phosphate monomers with N incorporated in both apical and as bridging sites in phosphate dimers. Structural results suggest LiPON's stability is a result of its glassy character. Free-standing LiPON films are produced that exhibit a high degree of flexibility, highlighting the unique mechanical properties of glassy materials.

Acetamide diethylphosphonate (AcPhos)-functionalized silica has been shown to have a high affinity for U(vi) in pH 2-3 nitric acid. Previous work with AcPhos-functionalized silica has focused on actinide and lanthanide extraction under various conditions, but has shown poor reproducibility in the functionalization process. For this work, four AcPhos-functionalized SBA-15 materials were synthesized and evaluated based on their U(vi) sorption capacity and their stability in nitric acid. Materials synthesized using pyridine as a basic catalyst were shown to form a greater fraction of polymeric structures at the silica surface, which correlated with higher structural integrity upon contact with acidic solutions. Single-pulse ³¹P and ¹H NMR spectra of these materials show evidence of phosphonic acid groups, as well as hydrogen-bonding interactions either between ligands or with the silica surface. Additionally, these materials were found to have significantly higher U(vi) sorption capacities and K_eq values than the materials synthesized without pyridine, most likely due to the ion-exchange properties of the phosphonic acid groups. The ³¹P-³¹P DQ-DRENAR NMR technique was used to compare the average strength of dipolar coupling interactions between phosphorus atoms for the four materials. Because the strength of dipolar coupling interactions depends on the number and proximity of neighboring spins, this technique provides information about the average density of ligands on the surface. The conventional functionalization procedure yielded materials with the lowest average surface ligand density, while those using extended reaction times and the pyridine base catalyst yielded materials with higher surface ligand densities.

Dengue is a mosquito-borne viral disease that is a major public health problem worldwide. In 2004, the Pediatric Dengue Cohort Study was established in Managua, Nicaragua, to study the natural history and transmission of dengue in children. Here, the authors describe the study design, methods, and results from 2004 to 2008. Initially, 3,721 children 2–9 years of age were recruited through door-to-door visits. Each year, new children aged 2 years are enrolled in the study to maintain the age structure. Children are provided with medical care through the study, and data from each medical visit are recorded on systematic study forms. All participants presenting with suspected dengue or undifferentiated fever are tested for dengue by virologic, serologic, and molecular biologic assays. Yearly blood samples are collected to detect inapparent dengue virus infections. Numerous information and communications technologies are used to manage study data, track samples, and maintain quality control, including personal data assistants, barcodes, global information systems, and fingerprint scans. Close collaboration with the Nicaraguan Ministry of Health and use of almost entirely local staff are essential components for success. This study is providing critical data on the epidemiology and transmission of dengue in the Americas needed for future vaccine trials.

Purpose

After chemotherapy for breast cancer, most women will recover some ovarian function, but the timing and extent of this recovery are poorly understood. We studied post-chemotherapy ovarian recovery in women with and without a history of ovarian suppression during chemotherapy.

Methods

Reproductive age breast cancer patients who were seen prior to chemotherapy for fertility preservation consult were consented for follow-up ovarian function assessment (every 3-6 months after chemotherapy) with antral follicle count (AFC) in this prospective cohort study. We restricted our analysis to those with menses present after chemotherapy. Box plots were used to demonstrate the change in follow-up AFC versus time elapsed after chemotherapy. A mixed effects regression model was used to assess differences in AFC.

Results

Eighty-eight patients with a history of newly diagnosed breast cancer were included. Forty-five patients (51%) had ovarian suppression with GnRH agonist (GnRHa) during chemotherapy. AFC recovery appeared to plateau at 1 year after completing chemotherapy at a median of 40% of pre-chemotherapy AFC. After adjustment for age, initial AFC, cyclophosphamide exposure, combined hormonal contraceptive (CHC) use, and tamoxifen use, AFC recovered faster and to a greater degree for those women who underwent GnRHa therapy for ovarian protection during chemotherapy (P = 0.032).

Conclusions

Women with menses after chemotherapy for breast cancer appear to recover their full potential AFC 1 year after their last chemotherapy dose. Treatment with GnRHa during chemotherapy is associated with a higher degree of AFC recovery. The findings of this study can aid in counseling patients prior to chemotherapy about expectations for ovarian recovery and planning post-treatment fertility preservation care to maximize reproductive potential when pre-treatment fertility preservation care is not possible or has limited oocyte yield.

Metal boride nanostructures have shown significant promise for hydrogen storage applications. However, the synthesis of nanoscale metal boride particles is challenging because of their high surface energy, strong inter- and intraplanar bonding, and difficult-to-control surface termination. Here, it is demonstrated that mechanochemical exfoliation of magnesium diboride in zirconia produces 3-4 nm ultrathin MgB₂ nanosheets (multilayers) in high yield. High-pressure hydrogenation of these multilayers at 70 MPa and 330 °C followed by dehydrogenation at 390 °C reveals a hydrogen capacity of 5.1 wt%, which is ≈50 times larger than the capacity of bulk MgB₂ under the same conditions. This enhancement is attributed to the creation of defective sites by ball-milling and incomplete Mg surface coverage in MgB₂ multilayers, which disrupts the stable boron-boron ring structure. The density functional theory calculations indicate that the balance of Mg on the MgB₂ nanosheet surface changes as the material hydrogenates, as it is energetically favorable to trade a small number of Mg vacancies in Mg(BH₄ )₂ for greater Mg coverage on the MgB₂ surface. The exfoliation and creation of ultrathin layers is a promising new direction for 2D metal boride/borohydride research with the potential to achieve high-capacity reversible hydrogen storage at more moderate pressures and temperatures.

The highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized covalent triazine framework (AlH₃ @CTF-bipyridine). This material and the counterpart AlH₃ @CTF-biphenyl rapidly desorb H₂ between 95 and 154 °C, with desorption complete at 250 °C. Sieverts measurements, ²⁷ Al MAS NMR and ²⁷ Al{¹ H} REDOR experiments, and computational spectroscopy reveal that AlH₃ @CTF-bipyridine dehydrogenation is reversible at 60 °C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH₃ binding to bipyridine results in single-electron transfer to form AlH₂ (AlH₃ )_n clusters. The resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

Abstract: The highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine‐functionalized covalent triazine framework (AlH3@CTF‐bipyridine). This material and the counterpart AlH3@CTF‐biphenyl rapidly desorb H2 between 95 and 154 °C, with desorption complete at 250 °C. Sieverts measurements, 27Al MAS NMR and 27Al{1H} REDOR experiments, and computational spectroscopy reveal that AlH3@CTF‐bipyridine dehydrogenation is reversible at 60 °C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH3 binding to bipyridine results in single‐electron transfer to form AlH2(AlH3)n clusters. The resulting size‐dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high‐capacity metal hydrides.

AIMS: Childhood adversities (CAs) predict heightened risks of posttraumatic stress disorder (PTSD) and major depressive episode (MDE) among people exposed to adult traumatic events. Identifying which CAs put individuals at greatest risk for these adverse posttraumatic neuropsychiatric sequelae (APNS) is important for targeting prevention interventions. METHODS: Data came from n = 999 patients ages 18-75 presenting to 29 U.S. emergency departments after a motor vehicle collision (MVC) and followed for 3 months, the amount of time traditionally used to define chronic PTSD, in the Advancing Understanding of Recovery After Trauma (AURORA) study. Six CA types were self-reported at baseline: physical abuse, sexual abuse, emotional abuse, physical neglect, emotional neglect and bullying. Both dichotomous measures of ever experiencing each CA type and numeric measures of exposure frequency were included in the analysis. Risk ratios (RRs) of these CA measures as well as complex interactions among these measures were examined as predictors of APNS 3 months post-MVC. APNS was defined as meeting self-reported criteria for either PTSD based on the PTSD Checklist for DSM-5 and/or MDE based on the PROMIS Depression Short-Form 8b. We controlled for pre-MVC lifetime histories of PTSD and MDE. We also examined mediating effects through peritraumatic symptoms assessed in the emergency department and PTSD and MDE assessed in 2-week and 8-week follow-up surveys. Analyses were carried out with robust Poisson regression models. RESULTS: Most participants (90.9%) reported at least rarely having experienced some CA. Ever experiencing each CA other than emotional neglect was univariably associated with 3-month APNS (RRs = 1.31-1.60). Each CA frequency was also univariably associated with 3-month APNS (RRs = 1.65-2.45). In multivariable models, joint associations of CAs with 3-month APNS were additive, with frequency of emotional abuse (RR = 2.03; 95% CI = 1.43-2.87) and bullying (RR = 1.44; 95% CI = 0.99-2.10) being the strongest predictors. Control variable analyses found that these associations were largely explained by pre-MVC histories of PTSD and MDE. CONCLUSIONS: Although individuals who experience frequent emotional abuse and bullying in childhood have a heightened risk of experiencing APNS after an adult MVC, these associations are largely mediated by prior histories of PTSD and MDE.