Skip to main content
eScholarship
Open Access Publications from the University of California
Cover page of Development of Extinction Imagers for the Determination of Atmospheric Optical Extinction

Development of Extinction Imagers for the Determination of Atmospheric Optical Extinction

(2014)

The primary goals of this project for JTO and ONR (Grant N00014-07-1-1060) were to further develop Extinction Imagers for use in the ocean environment, and to extend the capabilities into the Short Wave IR (SWIR).  Extinction Imaging is a method for determining the effective extinction coefficient over an extended path using a sensor at one end of the path.  It uses calibrated imagers to acquire the relative radiance of a dark target near the other the end of the path and the horizon sky in the direction of the dark target.  It is completely passive and thus covert, and the hardware is robust and relatively inexpensive.  It uses rigorous equations, which determine the extinction coefficient from the measured apparent contrast of the radiance of the dark target with respect to the horizon sky. 

 

The project was very successful.  We found that the ocean surface could readily be used as a dark target in red and SWIR wavelengths.  Both the red and the SWIR measurement results were excellent for daytime.  Comparisons with standard instruments, as well as uncertainty analysis, indicated that extinction imagers provide better measurements of the atmospheric extinction losses over extended paths than other methods of which we are aware.

 

Our secondary goals were to address the night regime, and to address slanted paths above the horizontal.  Regarding night, we found that the visible sensor acquired excellent data, but the ocean surface was not a good dark target in our wavelengths.  Recommendations on the handling of night are given in the report.  Regarding the lines of sight above the horizon, we developed a slant path algorithm that determines beam transmittance.  It performed very well.  Recommendations are made regarding integration of these techniques for military applications.