UC Davis

A two-chamber slurry microbial fuel cell (SMFC) was constructed using black-odorous river sediments as substrate for the anode. We tested addition of potassium ferricyanide (K₃[Fe(CN)₆]) or sodium chloride (NaCl) to the cathode chamber (0, 50, 100, 150, and 200 mM) and aeration of the cathode chamber (0, 2, 4, 6, and 8 h per day) to assess their response on electrical generation, internal resistance, and methane emission over a 600-h period. When the aeration time in the cathode chamber was 6 h and K₃[Fe(CN)₆] or NaCl concentrations were 200 mM, the highest power densities were 6.00, 6.45, and 6.64 mW·m^-2, respectively. With increasing K₃[Fe(CN)₆] or NaCl concentration in the cathode chamber, methane emission progressively decreased (mean ± SD: 181.6 ± 10.9 → 75.5 ± 9.8 mg/m³·h and 428.0 ± 28.5 → 157.0 ± 35.7 mg/m³·h), respectively, but was higher than the reference having no cathode/anode electrodes (~ 30 mg/m³·h). Cathode aeration (0 → 8 h/day) demonstrated a reduction in methane emission from the anode chamber for only the 6-h treatment (mean: 349.6 ± 37.4 versus 299.4 ± 34.7 mg/m³·h for 6 h/day treatment); methane emission from the reference was much lower (85.3 ± 26.1 mg/m³·h). Our results demonstrate that adding an electron acceptor (K₃[Fe(CN)₆]), electrolyte solution (NaCl), and aeration to the cathode chamber can appreciably improve electrical generation efficiency from the MFC. Notably, electrical generation stimulates methane emission, but methane emission decreases at higher power densities.