To enable the physics research that continues to deepen our understanding of the Universe, future circular colliders will require a critical and unique instrument—magnets that can generate a dipole field of 20 T and above. However, today’s maturing magnet technology for low-temperature superconductors (Nb-Ti and Nb3 Sn) can lead to a maximum dipole field of around 16 T. High-temperature superconductors such as REBCO can, in principle, generate higher dipole fields but significant challenges exist for both conductor and magnet technology. To address these challenges, several critical research needs, including direct needs on instrumentation and measurements, are identified to push for the maximum dipole fields a REBCO accelerator magnet can generate. We discuss the research needs by reviewing the current results and outlining the perspectives for future technology development, followed by a brief update on the status of the technology development at Lawrence Berkeley National Laboratory. We present a roadmap for the next decade to develop 20 T-class REBCO accelerator magnets as an enabling instrument for future energy-frontier accelerator complex.

In this paper we summarize the evolution and contributions of superconducting magnets to particle accelerators as chronicled over the last 50 years of Particle Accelerator Conferences (PAC, NA-PAC and IPAC). We begin with an historical overview based primarily on PAC Proceedings augmented with references to key milestones in the development of superconducting magnets for particle accelerators. We then provide some illustrative examples of applications that have occurred over the past 50 years, focusing on those that have either been realized in practice or provided technical development for other projects, with discussion of possible future applications.

The critical current density of Bi-2212 round wires has seen significant improvement over the past two years. We present the magnetic design and stress analysis of two Bi-2212 dipoles based on Canted-Cosine-Theta (CCT) technology using the state-of-the-art wires. The first design, based on a 19-strand Rutherford cable of θ0.8mm strands, is a two-layer dipole with a bore diameter of 40 mm and an outer diameter of 98.4 mm; it generates 5.4Twhen operating in stand-alone configuration and 18.9T in 15 T background field. The second design, based on a 13-strand Rutherford cable of θ0.8mm strands, is also a two-layer dipole with a bore diameter of 40 mm and an outer diameter of 81 mm; it generates 4.0 T when operating in stand-alone configuration and 17.8 T in 15 T background field. Normal stresses on the conductor in these magnets do not exceed 35 MPa when working under background field.Moreover, we propose a novel approach for increasing the efficiency of CCT magnets using keystoned Rutherford cable while removing the midplane ribs. with this method, it is possible to increase the efficiency of small radius CCT coils by 20%. We conclude that Bi-2212 can be used to increase the limit of accelerator magnet dipole fields beyond 15 T while managing stresses in the coils to acceptable levels.

The Future Circular Collider (FCC) study at CERN is investigating the design of a proton-proton collider with a center of mass energy of 100 TeV and a tunnel circumference of 100 km (FCC-hh). Nb3Sn arc dipoles with 50-mm aperture and 16-T operating field are required for this application. Among the possible magnetic layouts, block coils offer attractive features, in terms of conductor packing, separation between high-field and high-stress locations, use of flat cables, and simpler geometries for windings and parts. In order to assess these potential advantages, the HD series of block-coil models was developed at LBNL. These models achieved fields of 15-16 T in technology tests, and 13-14 T in accelerator relevant configurations, with bore diameters of 36-43 mm. In this paper, we discuss the implications of increasing the bore diameter to 50 mm, which is consistent with the latest FCC-hh design targets. A detailed quench protection analysis is performed using the new coupling-loss-based CLIQ system, expanding the safe parameter space with respect to the traditional approach based on quench heaters. Finally, alternative magnet design options, and further studies required to select among them, are outlined.

REBa2Cu3Ox (REBCO, RE = rare earth elements) coated conductors can carry high current in high background fields, in principle enabling dipole magnetic fields beyond 20 T. Although model accelerator magnets wound with single REBCO tapes have been successfully demonstrated, magnet technology based on high-current REBCO cables for high-field accelerator magnet applications has yet to be established. We developed a two-layer canted cosθ dipole magnet with an aperture of 70 mm using 30 m long commercial Conductor on Round Core (CORC®) wires. The 3.1 mm diameter CORC® wire contained 16 commercial REBCO tapes with a 30 μm thick substrate. The magnet was tested at 77 and 4.2 K. It generated a peak dipole field of 1.2 T with 4.8 kA at 4.2 K with neither thermal runaway nor training. Reasonable geometric field quality and strong magnetization-current effects with multipole decay were observed. Our work demonstrated a feasible high-temperature superconducting magnet technology as a first step toward a new accelerator magnet paradigm that will enable high-field inserts for next-generation circular colliders and stand-alone magnets that can operate over a wide temperature range for a broad range of applications.