Several systems rely on the accurate and linear detection of 500 MHz signals, (the fundamental frequency of both the Booster Ring and Storage Ring) over a dynamic range in excess of 25dB. Prior to this upgrade, the detector/monitor was diode based and though this type of detector could handle the dynamic range requirement it could not do so in an accurate and linear manner. In order to meet the requirements (dynamic range greater than or equal to 25dB, accurate and linear to +-0.25dB over the range, and additional circuitry to interface to the legacy control system and interlocks), a new RF Power Detector/Monitor has been developed using two AD8361, Analog Devices Tru RMS Detectors and a fuzzy comparator, which extends the overall detector's range to twice that of the AD8361. Further information is available [www.analogedevices.com/]. Details of the design requirements and the detector/monitor's circuit as well as the performance of the detector will be presented.

The main source of narrowband impedance in the Advanced Light Source (ALS) are higher order modes (HOMs) of the two main RF and three third harmonic cavities. These HOMs drive longitudinal and transverse coupled bunch instabilities, which are controlled using active beam feedback systems. The dominant longitudinal HOMs in both systems are TM011-like modes with the R/Q factor an order of magnitude higher than all other longitudinal modes. To reduce the growth rates within the range of the longitudinal feedback system (LFB), these modes were tuned away from beam resonances by means of cooling water temperature control (main rf system), and the combination of two tuners (third harmonic system). To improve the reliability of the longitudinal dampening system, we have built and installed E-type HOM dampers for the fundamental and harmonic cavities. We present the design, commissioning and performance of the HOM dampers in this paper.