In vivo and in vitro studies have shown that high contrast images of tooth demineralization can be acquired in the near-IR due to the high transparency of dental enamel. The purpose of this study is to compare the lesion contrast in reflectance at near-IR wavelengths coincident with high water absorption with those in the visible, the near-IR at 1300-nm and with fluorescence measurements for early lesions in occlusal surfaces. Twenty-four human molars were used in this in vitro study. Teeth were painted with an acid-resistant varnish, leaving a 4×4 mm window in the occlusal surface of each tooth exposed for demineralization. Artificial lesions were produced in the exposed windows after 1 & 2-day exposure to a demineralizing solution at pH 4.5. Lesions were imaged using NIR reflectance at 3 wavelengths, 1310, 1460 and 1600-nm using a high definition InGaAs camera. Visible light reflectance, and fluorescence with 405-nm excitation and detection at wavelengths greater than 500-nm were also used to acquire images for comparison. Crossed polarizers were used for reflectance measurements to reduce interference from specular reflectance. The contrast of both the 24 hr and 48 hr lesions were significantly higher (P<0.05) for NIR reflectance imaging at 1460-nm and 1600-nm than it was for NIR reflectance imaging at 1300-nm, visible reflectance imaging, and fluorescence. The results of this study suggest that NIR reflectance measurements at longer near-IR wavelengths coincident with higher water absorption are better suited for imaging early caries lesions.

Selective removal of dental composite with high precision is best accomplished using lasers operating at high pulse repetition rates focused to a small spot size. Conventional flash-lamp pumped Er:YAG lasers are poorly suited for this purpose, but new diode-pumped Er:YAG lasers have become available operating at high pulse repetition rates. The purpose of this study was to compare the ablation rates and selectivity of enamel and composite for a 30 W diode-pumped Er:YAG laser operating with a pulse duration of 30-50-μs and evaluate it's suitability for the selective removal of composite from tooth surfaces. The depth of ablation and changes in surface morphology were assessed using digital microscopy. The fluence range of 30-50 J/cm² appeared optimal for the removal of composite, and damage to sound enamel was limited to less than 100-μm after the removal of composite as thick as 700-800-μm. Future studies will focus on the use of methods of feedback to further increase selectivity.

Selective removal of dental calculus with high precision is best accomplished using lasers operating at high pulse repetition rates focused to a small spot size to limit damage to sound tissues. Conventional flash-lamp pumped Er:YAG lasers are poorly suited for this purpose, but new diode-pumped solid state (DPSS) Er:YAG lasers have become available operating at high pulse repetition rates. The purpose of this study was to determine if image-guided laser ablation can be used to selectively remove calculus from tooth surfaces with minimal damage to the underlying sound cementum and dentin. A DPSS Er:YAG laser system was used to selectively remove calculus from ten extracted teeth using sequential SWIR images at 1500-1750-nm. The selectivity of removal was assessed using digital microscopy and optical coherence tomography. Calculus was removed with minimal damage to the underlying sound cementum and dentin.

Demineralized root dentin and cementum are mostly collagen that shrinks significantly upon dehydration. Active root caries lesions manifest shrinkage upon dehydration, however during the remineralization of root caries lesions mineral is deposited on the outside of the lesion arresting the lesion and arrested lesions no longer manifest shrinkage upon dehydration. Optical coherence tomography is ideally suited for the measurement of that shrinkage for the assessment of lesion activity. In this study the shrinkage of natural root caries lesions on extracted teeth were measured using a CP-OCT system with a 3D printed appliance with an integrated air nozzle suitable for clinical use.

Background and objectives

Previous studies have shown that large changes in the diffuse reflectivity of caries lesions during drying with air can be used to assess lesion activity. The largest changes occur at short wavelength infrared (SWIR) wavelengths coincident with high water absorption. The strongest water absorption in the SWIR occurs at 1950 nm. In this study changes in the reflectivity of simulated lesions with varying degrees of remineralization was measured at 1500-2340 nm and at 1950 nm as the samples were dried with air.

Study design/materials and methods

Twenty bovine enamel surfaces each with five treatment windows were exposed to two demineralization/remineralization regimens to produce simulated lesions of varying depth, severity, and mineral gradients. An extended range tungsten-halogen lamp with a long pass filter (1500-2340 nm) and a broadband amplified spontaneous emission source centered near the peak of the water-absorption band at 1950-nm were used as light sources and an extended range InGaAs camera (1000-2340 nm) was used to acquire reflected light images as the samples were dried with air. Lesions were also assessed using digital microscopy, polarized light microscopy, optical coherence tomography, and transverse microradiography.

Results

Both wavelength ranges showed extremely high lesion contrast (>0.9) for all six lesion treatment windows in both models. The change in contrast (ΔI) was significantly higher for the 1950 nm broadband source for all the intact lesion windows compared with the 1500-2340 nm wavelength range.

Conclusion

SWIR light at 1950 nm yields extremely high contrast of demineralization and appears to be the optimum wavelength for the assessment of lesion activity on tooth coronal surfaces. Lasers Surg. Med. 00:00-00, 2020. © 2020 Wiley Periodicals LLC.

Dental enamel is highly transparent at near-IR wavelengths and several studies have shown that these wavelengths are well suited for optical transillumination for the detection and imaging of tooth decay. We hypothesize that these wavelengths are also well suited for imaging cracks in teeth. Extracted teeth with suspected cracks were imaged at several wavelengths in the near-IR from 1300-1700-nm. Extracted teeth were also examined with optical coherence tomography to confirm the existence of suspected cracks. Several teeth of volunteers were also imaged in vivo at 1300-nm to demonstrate clinical potential. In addition we induced cracks in teeth using a carbon dioxide laser and imaged crack formation and propagation in real time using near-IR transillumination. Cracks were clearly visible using near-IR imaging at 1300-nm in both in vitro and in vivo images. Cracks and fractures also interfered with light propagation in the tooth aiding in crack identification and assessment of depth and severity.

Introduction

In vivo and in vitro studies have shown that high contrast images of tooth demineralization can be acquired in the near-infrared (near-IR) without the interference of stain. The purpose of this study is to compare the lesion contrast in reflectance at near-IR wavelengths coincident with high water absorption with those in the visible, the near-IR at 1,300 nm and with fluorescence measurements for early lesions in occlusal surfaces.

Methods

Twenty-four human molars were used in this in vitro study. Teeth were painted with an acid-resistant varnish, leaving a 4 × 4 mm window in the occlusal surface of each tooth exposed for demineralization. Artificial lesions were produced in the exposed windows after 1- and 2-day exposure to a demineralizing solution at pH 4.5. Lesions were imaged using near-IR reflectance at three wavelengths, 1,300, 1,460, and 1,600 nm using a high definition InGaAs camera. Visible light reflectance, and fluorescence with 405 nm excitation and detection at wavelengths greater than 500 nm were also used to acquire images for comparison. Crossed polarizers were used for reflectance measurements to reduce interference from specular reflectance.

Results

The contrast of both the 1- and 2-day lesions were significantly higher (P < 0.05) for near-IR reflectance imaging at 1,460 and 1,600 nm than it was for near-IR reflectance imaging at 1,300 nm, visible reflectance imaging, and fluorescence.

Conclusion

The markedly higher contrast at 1,460 and 1,600 nm wavelengths, coincident with higher water absorption, suggest that these wavelengths are better suited than 1,300 nm for imaging early/shallow demineralization on tooth surfaces.

Demineralized root dentin and cementum are mostly collagen that shrinks significantly upon dehydration. Active root caries lesions manifest shrinkage upon dehydration, however during the remineralization of root caries lesions mineral is deposited on the outside of the lesion arresting the lesion and arrested lesions no longer manifest shrinkage upon dehydration. Optical coherence tomography is ideally suited for the measurement of that shrinkage for the assessment of lesion activity. In this study the shrinkage of natural root caries lesions on extracted teeth were measured using a CP-OCT system with a 3D printed appliance with an integrated air nozzle suitable for clinical use.

New diode-pumped solid state (DPSS) Er:YAG lasers have become available operating at high pulse repetition rates. These lasers are ideally suited for integration with laser scanning systems for the selective removal of dental decay and composite restorative materials from tooth surfaces. The purpose of this study was to determine if a DPSS Er:YAG laser system is suitable for the selective removal of composite from tooth surfaces. Relative ablation rates of composite and enamel were determined and composite was removed from tooth surfaces using a DPSS Er:YAG laser. Composite was removed very rapidly with ablation rates approaching 50-µm per pulse. A fluence of ~50 J/cm² appeared optimal for the removal of composite and damage to the enamel was limited to less than 100-µm after the removal of composite as thick as 700-800-µm; however, dentin is removed at similar rates to composite. The DPSS Er:YAG laser appears to be better suited for the removal of composite than conventional flash-lamp pumped Er:YAG lasers since composite is ablated at higher rates than dental enamel and the high pulse repetition rates enable greater selectivity while maintaining high removal rates.

Previous studies have established that carious lesions can be imaged with high contrast using near-IR wavelengths coincident with high water absorption, namely 1450-nm, without the interference of stains. It has been demonstrated that computer-controlled laser scanning systems utilizing IR lasers operating at high pulse repetition rates can be used for serial imaging and selective removal of caries lesions. In this study, a point-to-point scanning system was developed integrating a 1450-nm diode laser with the CO₂ ablation laser. This approach is advantageous since it does not require an expensive near-IR camera. In this pilot study, we demonstrate the feasibility of a combined NIR and IR laser system for the selective removal of carious lesions.